| 
Airtech
Brushbag is a one-part room temperature liquid silicone paste
that has been designed for the fabrication of reusable vacuum
bags. Brushbag cures rapidly when exposed to moist air, is
transparent, and is self-leveling. The product is designed
for use with a reinforcing material and is ideal for infusing
small composite parts.
|
|
Tac-Strip
is a fiberglass fabric mesh coated on both sides with a “high
tack” pressure sensitive adhesive. It is designed to
hold dry fabrics in place as required for resin infusion processing.
Tack-Strip has the added advantage of being very “clean”
compared to spray adhesives commonly used for ply placement.
|
|
Greenflow
75
Resin distribution medium
Resin Infusion processing
is becoming increasingly popular, particularly in the marine
industry. Laminates are being made lighter and stronger while
using much less resin. Greenflow 75 resin distribution medium
has been designed to distribute resin with little waste due
to its low profile and tight construction. This medium has
almost twice the flow speed of our Resin Flow 60.
|
|
| |
|
|
 |
|
Flashbreaker
HT is used for heavy hold down applications where a high
level of adhesion is required. This tape is ideal for holding down heavier non-woven breather |
materials. Has 50% better adhesion
than our industry leading Flashbreaker tape. |
Please
contact Airtech or your Local Airtech Distributor for additional
information:
Airtech
International Inc.
5700 Skylab Road
Huntington Beach, CA 92647
Phone: (714) 899-8100
Fax: (714) 899-8179 |
